Basic Info.
Mesh Form
Internal Engaged
Tooth Flank
Straight Tooth
Type
Self-Priming Pump with Inner Recirculation
Transmission
Direct Connection Transmission
Air Engine Type
Fitted Motor
Transport Package
Wooden Case
Product Description
Lobe pumps
Principle of the rotor pump
Rotor Pump is also named roots pump, colloidal pump, high concentration pump, etc, It depends on two synchronic rotators. The two rotators are driven by a pair of outer-set synchronic gear boxes and the transmission shaft. They move synchronically in counter-clockwise directions. Which consequently, builds up high vacuum capacity and emission pressure. The two rotators divider the rotator room into many smaller parts. When it revolves to positionI, only entrance if filled with medium; When it revolves to positionIIencloses part of the medium, when arriving at position III, room IIIencloses medium, and finally it goes to position IV, then entrance and export housing are interlinked and the medium is transported to the ourlet. As this process is repeated, medium is to be gone out by unfailing transportation.
Rotor Pump Features
1. All parts of the pump, touching transporting materials, is made of stainless steel according to the sanitation standard. Its airproof parts adopt innocuity latex.
2. The pollution for transporting materials is avoided by both streamline structure of rotor and rotor room without dead center and nonmetal parts.
3. Be fit for cleaning with CIP and steam sterilization on the spot, meeting the American criterion of FDA and GMP entirely.
4. Be fit for transporting liquid of bubbles, high viscosity and consistency and with any grain medium especially. The materials transported by the pump keep original character without and physical and chemical reaction.
5. Adopt dynamic and static ring-shaped mechanical airproof, swash with water directly, enduring high pressure, without leakage and not easy to abrase.
6. Small cubaque, heavy flow, high pressure of head of delivery. Be fit for the quantified transportation of long distant and high resistance.
7. Pump impeller and transmission gears are separated, while every parts in the pump room keep certain space, without interference one another, low noise, high reliability, long time use, energy saving.
8. Having been DEP; Oyed by a transducer, the pump can adjust flux, and it also can be used as a measure pump.
9. The mixture of vapour, liquid and solid can be transported, and the medium under 1000000CP viscosity or oar materials with 55% solid can be also transported.
10. The product has the feature of compact in frame, steady in performance, facilitated in operatin and low costs for operation.
Application
@Food Industry: Milk, yoghourt, butter, ice-cream, chocolate, jelly, jam, syrup, beer, soft drinks, fruit juice, pudding, tomato sauce, sesame, peanut butter, condiment, edible oil, cheese blocks, whey, wort, yeast, etc.
@Daily Chemicals: Face cream, shampoo, detergent, hand sanitizer, skin gel, detergent, cosmetics, skin cream, toothpaste, hair dye, soap, shoe Polish, glycerol, fatty alcohol, hair gel, etc.
@Chenical Industry: Gasoline, diesel, kerosene, crude oil, sludge, asphalt, paint, pigment, dyes, coating material, catalyzer, leather, fat solvents, resins, silicone oil, adhesives, latex, colloida material, and other colloidal subst, etc.
@Pharmacy Industry: Health care products, pharmaceutical, vaccine, biological products, syrup, slurry, protein, royal jelly, extracts, emulsions, pills slurry, fish meal, pollen, etc.
@Enviromental Protection: Mud, manure, fertilizer solution, sewage, sludge, toxic agents, etc.
@Constructio Industry: Indoor / outdoor wall coating, paints, coatings, resins, organic solvents, water proof coating, ceramic coating, paint coating, ceramic glazing, etc.
@Others: Nano-materials, patermaking, textile, plastic, biochemical, coal industry, etc.
Modle | Power (kw) | L (cm) | L1 (cm) | W (cm) | W1 (cm) | W2 (cm) | H (cm) | H1 (cm) | D (cm) |
RP25-5 | 0.55 | 700 | 360 | 170 | 140 | 155 | 285 | 140 | Φ 25 |
RP25-8 | 0.75 | 760 | 400 | 210 | 180 | 155 | 300 | 155 | Φ 25 |
RP25-12 | 1.1 | 780 | 400 | 210 | 180 | 200 | 380 | 175 | Φ 25 |
RP32-15 | 1.5 | 850 | 420 | 250 | 210 | 200 | 390 | 175 | Φ 32 |
RP38-22 | 2.2 | 975 | 500 | 330 | 260 | 225 | 455 | 185 | Φ 38 |
RP38-30 | 3 | 1000 | 500 | 330 | 260 | 245 | 465 | 185 | Φ 38 |
RP45-45 | 4 | 1060 | 500 | 330 | 260 | 280 | 475 | 190 | Φ 45 |
RP50-58 | 4 | 1120 | 500 | 330 | 260 | 280 | 480 | 225 | Φ 50 |
RP50-70 | 5.5 | 1245 | 620 | 385 | 325 | 280 | 585 | 225 | Φ 50 |
RP65.5-85 | 7.5 | 1250 | 620 | 385 | 325 | 375 | 600 | 270 | Φ 63.5 |
RP63.5-110 | 7.5 | 1250 | 620 | 385 | 325 | 375 | 660 | 300 | Φ 63.5 |
RP76-160 | 11 | 1325 | 680 | 470 | 420 | 375 | 660 | 300 | Φ 76 |
RP89-230 | 11 | 1325 | 680 | 470 | 420 | 375 | 660 | 300 | Φ 89 |
RP89-260 | 15 | 1510 | 680 | 470 | 420 | 375 | 660 | 320 | Φ 89 |
RP108-320 | 18.5 | 1510 | 750 | 470 | 525 | 415 | 730 | 320 | Φ 108 |
Address:
Huishu Road, Linhai, Zhejiang, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Chemicals, Industrial Equipment & Components, Instruments & Meters, Light Industry & Daily Use, Manufacturing & Processing Machinery, Metallurgy, Mineral & Energy, Packaging & Printing, Textile, Tools & Hardware
Management System Certification:
ISO 9001, ISO 14001, OHSAS/ OHSMS 18001
Company Introduction:
Zhejiang Ligao Pump Technology Co., Ltd. Was established in 2007, which is located in Linhai city, Zhejiang Province. It is a national high-tech enterprise specializing in development, production and sales of metering pumps, rotary lobe pumps, packaged dosing systems, air diaphragm pumps and other pump accessories. Our metering pumps cover solenoid diaphragm metering pump, mechanical diaphragm metering pumps, plunger metering pump, hydraulic diaphragm metering pump. Our pumps are widely used in different fields: Water treatment, chemical processing, petrochemical industry, food industry, water plants, pharmaceutical industry, and so on.
We have obtained more than 30 patents, including invention patents and utility patents. Our company and products are certified by I S O 9001, I S O 14001, O H S A S 18001, CE and so on.
The company has more than 150 units advanced machining equipments, and more than 20 advanced test equipments. With more than a decade development, our products have been sold worldwide more than 50 countries, such as South Korea, Thailand, Indonesia, Sweden, USA, and so on. We have a perfect sales service system, from the marketing, distribution management, direct marketing business, technical support, after-sales service, regional development. In order to offer better service and technical support for our customers, we have set up service centers both at home and abroad.
We sincerely hope we can establish long-term cooperation with you.